====Problems with NETPLAN====

If you experience any problems with NETPLAN after any update. It is because netplan try's to disable your old settings. To solve this issue try check or install the following tools

apt install ifupdown
apt install netplan
apt install net-tools

These tools are essential before you change anything on your system. 

This implies that you have the possibility to go back to a configuration in which you stil have a network connection, if not you have to find a way to get ifup running.

So, solving this problem is to edit your configuration file /etc/netwrok/interfaces.\\

Enter the following for DHCP:\\
\\
//# The loopback network interface\\
auto lo\\
iface lo inet loopback\\
\\
# The primary network interface\\
auto eth0\\
iface eth0 inet dhcp//
\\ \\
Enter this if you would like to have a static adres:\\
\\
//# The primary network interface\\
auto eth0\\
iface eth0 inet static\\
address 192.168.0.X\\
netmask 255.255.255.0\\
network 192.168.0.0\\
broadcst 192.168.0.255\\
gateway 192.168.0.1\\
dns-nameservers 192.168.0.3//

After editing the file restart your network with /etc/init.d/networking restart

if you don't see you network you probably haf to ifup eth0 to bring up your network again.

That's all,

Enjoy,

\\
**Your ArtIT Team**
\\
\\
**[[linux|BACK]]**