apcaccu
This is an old revision of the document!
Change APC UPS Accu
This is an example for an APC 1400 UPS. Other APC's might be the same.
- Get out the yellow fuser
- Unscrew 4 screws on the top backside of the ups
- Turn the UPS and loosen the from at the bottom side with two screwdrivers
- Put 1 screwdriver in the opening and pull a little bit
- Loosen the side notches with the other screwdriver until the front is off
- Unscrew the 2 screws at the front
- Laydown the UPS on its side and remove the upper case with 2 screwdrivers
Enjoy,
Your ArtIT Team
BACK
apcaccu.1605872334.txt.gz · Last modified: 2020/11/20 12:38 by chris